| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Engine/Hybrid System | Section: Engine Control | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000002H5D00HX |
| Title: 3UR-FE ENGINE CONTROL: POWER STEERING OIL PRESSURE SWITCH: REMOVAL (2008 Sequoia) | ||
REMOVAL
1. REMOVE FRONT FENDER APRON SEAL RH
2. DRAIN POWER STEERING FLUID
3. REMOVE POWER STEERING OIL PRESSURE SWITCH
|
(a) Disconnect the switch connector. |
(b) Using a 24 mm deep socket wrench, remove the oil pressure switch.
(c) Remove the O-ring.
|
|